Full Coilovers 24 Way Damper Adjustable Shocks compatible for Toyota Corolla Sedan 09-18

Compatible Vehicles

• Compatible for TOYOTA COROLLA (E140) AZE141L XRS 2009-2010
• compatible for TOYOTA COROLLA (E140/E160) ZRE142L LE 2009-2013
• compatible for TOYOTA COROLLA (E150/E170) ZRE172L all 2014-2019
• compatible for TOYOTA MATRIX (E140) LE 2009-2014

Introduction

MXR-B3 is based on MXR-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions.

Specification

• Front top mount: Pillow ball with camber plate
• Rear top mount: Standard rubber
• Damping adjustable: Available, 24 levels of rebound damping force
• Height adjustable: Yes, lowering 25-75mm depending on the vehicle models
• Camber adjustable: Available
• Spring rate Front: 10 kg/mm (560 lbs/in)
• Spring rate Rear: 6 kg/mm (336 lbs/in)
• Front spring inner diameter: 70.5mm
• Rear spring inner diameter: 70.5mm
• Spring length Front: 200 mm
• Spring length Rear: 160 mm
• Spring Preload advised: 7-10 mm
• Damping rod diameter Front: Φ 22 mm
• Damping rod diameter Rear: Φ 12.5 mm
• Damping thread Front: M14×1.5 mm
• Damping thread Rear: M12×1.25 mm
• Twin -tube Diameter Front: 55 mm
• Twin -tube Diameter Rear: 55 mm
• Rod End Thread Front: M55×2 mm
• Rod End Thread Rear: M55×2 mm
• Front Collapsed Length: 360 mm / 14.17"
• Front Extended Length: 455 mm / 17.91"
• Rear Collapsed Length: 313 mm / 12.32"
• Rear Extended Length: 370 mm / 14.57"
• Colour: Red body with black spring

Dimension

• Package size : 62*50*20 cm
• Weight: 30100 g

Feature

• 1. Lowered height adjustment from 25-75mm (depends on vehicle models) which allows a lower centre of gravity and also adds a more aggressive stance
• 2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
• 3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
• 4. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response. ( for some models)
• 5. CNC machined Aluminium top mounts and lockers-- - excellent strength, and save weight
• 6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
• 7. High tensile spring--- 600,000 times continuously test to assure its high tensile strength.
• 8. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
• 9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
• 10. Corrosion Finish - Anodized Aluminium And Powder Coated Carbon Steel Parts

Package included

• Package included：
• 2x Front coil-overs
• 2x Rear coil-overs
• 2x C spanners
• 1x Allen wrench

Note

• 1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
• 2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
• 3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
• 4. Examine the clearance between tyres and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
• 5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-5 months will keep it smooth and clean, which helps to extend the lifetime.